Anonymous

What Is The Length Size Of Cricket Field?

15

15 Answers

Connor Sephton Profile
Connor Sephton answered
It is around 1,500, as no cricket pitch is exactly the same size. You can work out the circumference of any cricket pitch if you know the diameter by multiplying that by pi (which can be rounded up to around 3.14). However, if the cricket pitch isn't perfectly circular, then it will be much more complicated to find the circumference and you will no doubt have to seek the assistance of an experienced mathematician to work it out. You could of course measure it yourself but that would take a great deal of effort as you would have to find a way of measuring it, and then of course walk around the whole pitch yourself.

If you want to know roughly, however, then stick to the 1500 number. This is a relatively accurate number, assuming that the cricket pitch is between 450 and 500 feet.

If you really want to know and you can't think of any other way of finding out what the circumference is then you could perhaps talk to the person who owns the cricket field. They will no doubt know all of the measurements given that they would have probably been around when it was made.

Most of the action in the cricket game takes place in the center of the circular or oval ground, where you will find a rectangular strip of clay and a small grass patch which is called the pitch. This pitch will measure around 20 meters long, or 22 yards.

At either end of the pitch there will be three upright wooden stakes and these are known as the stumps. The stumps are hammered into the ground, and there are two wooden crosspieces (bails) that sit in grooves at the top of the stumps. Every set of the three stumps and the two bails are known collectively as a wicket.
Alishan Samdani Profile
Alishan Samdani answered
A cricket field is normally a circular or oval shaped, having a diameter that varies between 450 and 500 feet. For detailed information on the field and pitch of a cricket ground, visit the following link.
Cricket field
Lynn Butler Profile
Lynn Butler answered
It all depends on what kind of ground you talking about. It also means you want all lenth's/ all four sides. But as I said it all depends on what cricket ground you talking about.
Anonymous Profile
Anonymous answered
A cricket field consists of a large circular or oval-shaped grassy ground on which the game of cricket is played. There are no fixed dimensions for the field but its diameter usually varies between 450 feet (137 m) to 500 feet (150 m). On most grounds, a rope demarcates the perimeter of the field and is known as the boundary
Dharshana Shalien Jayasekera Profile
The size of the pitch on which cricket is played varies from ground to ground, but the pitch
is always rectangular in shape and covers an area of 22 yards and ten feet. When the length
and width of a cricket pitch are measured in terms of metres, it is 20.12 metres long and 3.05 metres wide.
Chinno Profile
Chinno answered
Usually 500 feet.
Puru Nepal Profile
Puru Nepal answered
The length of cricket field boundaries are different sizes. There is no required to particular sizes. It depend on total size of ground . Some boundaries are 70 meter far from the pitch and some are 60 meter only.
Afzaal Ahmad Profile
Afzaal Ahmad answered
The pitch of a cricket ground is rectangular area of the ground whose length is 22 yards or 20.12 meters and 10 feet or 3.05 meters in width. It is bounded at both end by the creases and on both sides by imaginary lines, one each side of the imaginary line joining the centers of the two middle stumps, each parallel to it and 5 feet or 1.52 meters from it.
Anonymous Profile
Anonymous answered
The boundary lenght in cricket ground has no fixed value but it must be 55 meters or more. Normally, we have the grounds with 70 meter boundary.
Akshay Kalbag Profile
Akshay Kalbag answered
The size of the pitch on which cricket is played varies from ground to ground, but the pitch is always rectangular in shape and covers an area of 22 yards (in terms of the length) and ten feet (in terms of the width). When the length and width of a cricket pitch are measured in terms of metres, it is 20.12 metres long and 3.05 metres wide.

The popping crease, which is also called the batting crease, is marked at a distance of approximately 1.22 metres in front of the stumps at both ends. The stumps are set along the bowling crease. The return creases at located at right angles to the popping crease and the bowling crease. They are measured at a distance of 1.32 metres on either side of the two middle stumps.

Answer Question

Anonymous